Project Description
Blow molding machine 220L
BASIC EQUIPMENT
Clamping system Single station +High-precision guide+Large arm cylinder axle
Extrusion system Hard gear box+ inverter
Die system Control-incoming die with special steel
Hydraulic system Hydraulic valve, seal parts and proportional control
Control system Import PLC+Human-machine+PLC automatic temperature control model
Main Parameters | Unit | GRT220-220L |
Max. Product Volume | (L) | 220 |
Dry Cycle | (pcs/h) | 280 |
Screw Diameter | (mm) | 120 |
Screw L/D Ratio | (L/D) | 33 |
Screw Drive Power | (KW) | 110/132 |
Screw heating Power | (4ΦKW) | 36 |
Screw Heating Zone | (Zone) | 6 |
HPDE Output | (kg/h) | 350 |
Oil Pump Power | (KW) | 55 |
Clamping Force | (KN) | 900 |
Mold Stroke | (mm) | 700-1600 |
Mold platen size | (W×H)(mm) | 1350×1600 |
Max. Mold Size | (W×H)(mm) | 1100×1600 |
Accumulator Capacity | (L) | 25 |
Max. Die Diameter | (mm) | 580 |
Die Heating Power | (4ΦKW) | 30 |
NO. of Heating Zone | (Zone) | 6 |
Blowing Pressure | (MPa) | 0.8 |
Air Consumption | (M3/min) | 1.8 |
Cooling Water Pressure | (MPa) | 0.3 |
Water Consumption | (L/min) | 220 |
Machine Size | (L×W×H)(m) | 6.0×3.0×4.9 |
Machine Weight | (Ton) | 30 |
