Project Description
Blow molding machine 30L
Three tie bar mold-closing unit, three cylinders for clamping, make the clamping equally distributed and more steady.
Adopt the liner motion guide to the machine, reduce the friction force, make the motion quicker and increase the precision of the mold closing
Introduce “quick-charge”and energy saving valve to the hydraulic system, effective reduce to be the lower working temperature, extend the working life of the hydraulic parts, and save 20% to 40% energy power than the normal type.
Main Parameters | Unit | GRT80-30L |
Max. Product Volume | (L) | 30 |
Dry Cycle | (pcs/h) | 650 |
Screw Diameter | (mm) | 80 |
Screw L/D Ratio | (L/D) | 25 |
Screw Drive Power | (KW) | 30 |
Screw heating Power | (4ΦKW) | 16 |
Screw Heating Zone | (Zone) | 4 |
HPDE Output | (kg/h) | 100 |
Oil Pump Power | (KW) | 15 |
Clamping Force | (KN) | 220 |
Mold Stroke | (mm) | 400-830 |
Max. Mold Size | (W×H)(mm) | 600×700 |
Accumulator Capacity | (L) | 4 |
Max. Die Diameter | (mm) | 300 |
Die Heating Power | (4ΦKW) | 11.9 |
NO. of Heating Zone | (Zone) | 4 |
Blowing Pressure | (MPa) | 0.8 |
Air Consumption | (M3/min) | 0.8 |
Cooling Water Pressure | (MPa) | 0.3 |
Water Consumption | (L/min) | 60 |
Machine Size | (L×W×H)(m) | 4.23×2.3×3.5 |
Machine Weight | (Ton) | 11.5 |
