Project Description
Double station blow molding machine 10ML-2L
BASIC EQUIPMENT
Clamping system Single station +High-precision guide+Large arm cylinder axle
Extrusion system Hard gear box+ inverter
Die system Control-incoming die with special steel
Hydraulic system Hydraulic valve, seal parts and proportional control
Control system Import PLC+Human-machine+PLC automatic temperature control model
Main Parameters | Unit | GRT60-2L |
Max. Product Volume | (L) | 2 |
Dry Cycle | (pcs/h) | 900×2 |
Screw Diameter | (mm) | 60 |
Screw L/D Ratio | (L/D) | 24 |
Screw Drive Power | (KW) | 15 |
Screw heating Power | (3ΦW) | 6.5 |
Screw Heating Zone | (Zone) | 3 |
HPDE Output | (kg/h) | 70 |
Oil Pump Power | (KW) | 5.5 |
Clamping Force | (KN) | 40 |
Mold Stroke | (mm) | 138-368 |
Max. Mold Size | (W×H)(mm) | 300×320 |
Max. Die Diameter | (mm) | 100 |
Die Heating Power | (4ΦKW) | 1.8 |
NO. of Heating Zone | (Zone) | 3 |
Blowing Pressure | (MPa) | 0.6 |
Air Consumption | (M3/min) | 0.5 |
Cooling Water Pressure | (MPa) | 0.3 |
Water Consumption | (L/min) | 50 |
Machine Size | (L×W×H)(m) | 2.7×1.9×2.6 |
Machine Weight | (Ton) | 4.3 |
